- Title
- Direct methane conversion to value-added products over Fe-FER catalysts
- Creator
- Zhao, Guangyu; Kennedy, Eric M.; Stockenhuber, Michael; Adesina, Adesina A.; Li, Meng Jung
- Relation
- 12th Natural Gas Conversion Symposium 2019. Proceedings of the 12th Natural Gas Conversion Symposium 2019 (San Antonio, TX 2-6 June, 2019) p. 273-276
- Relation
- https://aiche.confex.com/aiche/ngcs19/webprogram/Paper545614.html
- Publisher
- American Institute of Chemical Engineers (AIChE)
- Resource Type
- conference paper
- Date
- 2019
- Description
- Direct oxidation of methane to value-added products, such as methanol and formaldehyde, has received extensive attention in the field of chemical engineering and catalysis. However, current direct methane oxidation processes at high temperature (normally 600¡ãC¨C900¡ãC) suffer from poor selectivity of C1-oxygenates. Conversely, a relatively high selectivity to desired products was observed at low temperature (lower than 200¡ãC), but these routes are not regarded as truly catalytic processes because an additional extraction step is necessary to obtain the desired products. Therefore, the current study on methane oxidation under moderate temperatures (350¡ãC) has been conducted, aiming to synthesize methanol, formaldehyde and dimethyl ether (DME) over heterogeneous catalysts with the need for an extract step 4.
- Subject
- direct methane conversion; active sites; incipient wetness impregnation; solid state ion exchange; SDG 7; Sustainable Development Goals
- Identifier
- http://hdl.handle.net/1959.13/1482638
- Identifier
- uon:50988
- Identifier
- ISBN:9781510888883
- Language
- eng
- Reviewed
- Hits: 2184
- Visitors: 2182
- Downloads: 0
Collections
Goal 7: Ensure access to affordable, reliable, sustainable and modern energy
| Thumbnail | File | Description | Size | Format |
|---|