- Title
- Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
- Creator
- Veyhl, C.; Belova, I. V.; Murch, G. E.; Fiedler, T.
- Relation
- Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing Vol. 528, Issue 13-14, p. 4550-4555
- Publisher Link
- http://dx.doi.org/10.1016/j.msea.2011.02.031
- Publisher
- Elsevier
- Resource Type
- journal article
- Date
- 2011
- Description
- In the present paper, the macroscopic mechanical properties of open-cell M-Pore® sponge (porosity of 91–93%) and closed-cell Alporas® foam (porosity of 80–86%) are investigated. The complex geometry of these cellular materials is scanned by micro-computed tomography and used in finite element (FE) analysis. The mechanical properties are determined by uni-axial compression simulations in three perpendicular directions (x-, y- and z-direction). M-Pore® and Alporas® exhibit the same qualitative mechanical characteristics but with quantitative differences. In both cases, strong anisotropy is observed for Young's modulus and the 0.002 offset yield stress. Furthermore, for the investigated relative density range a linear dependence between relative density and mechanical properties is found. Finally, a distinctly higher Young's modulus and 0.002 offset yield stress is observed for Alporas®.
- Subject
- aluminium foam; cellular materials; porous materials; micro-computed tomography; finite element method; mechanical characterisation
- Identifier
- http://hdl.handle.net/1959.13/1065621
- Identifier
- uon:17885
- Identifier
- ISSN:0921-5093
- Language
- eng
- Reviewed
- Hits: 1287
- Visitors: 1258
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|