Please use this identifier to cite or link to this item: http://hdl.handle.net/1959.13/921009
- Title
- A narrow band high frequency distributed power transformer model for partial discharge location
- Author/Creator
-
Mitchell, S. D.;
Welsh, J. S.;
Middleton, R. H.;
Phung, B. T.
- Description
- This paper utilizes a narrowband high frequency distributed transformer model to estimate partial discharge location. Here a narrow band of frequencies within the frequency response of the system, that exhibit resonant pole behavior, is specifically targeted. It is proposed that the observed response is due to the interaction of residual winding inductance with capacitance to ground. This physical phenomenon is inherently distributed; hence regions within the frequency response related to this interaction will be dependent upon the input location. With this premise an algorithm that estimates the location of the partial discharge by iteratively comparing the proposed model at various locations within the winding with the observed partial discharge frequency response is implemented. The algorithm was tested on a single phase of a 66kV/25MVA interleaved transformer winding where the partial discharge was injected via an oil immersed point-plane 7.5kV source.
- Relation
- 2007 Australasian Universities Power Engineering Conference (AUPEC'07). Proceedings of the 2007 Australasian Universities Power Engineering Conference (Perth, W.A. 9 - 12 December, 2007)
- Publisher Link
- http://dx.doi.org/10.1109/AUPEC.2007.4548109
- Date
- 2007
- Publisher
- Institute of Electrical and Electronics Engineers (IEEE)
- Keyword(s)
-
power transformer;
frequency;
partial discharge;
fault location;
modeling;
state space methods;
simulation;
transient response
- Resource Type
- conference paper
- Rights
- Copyright © 2007 IEEE. Reprinted from the Proceedings of the 2007 Australasian Universities Power Engineering Conference. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Newcastle's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.
- Identifier
- http://hdl.handle.net/1959.13/921009
- Identifier
- ISBN:9780646494883
- Language
- eng
- Reviewed
- Full Text
-
-
69 Visitors
78 Hits
5 Downloads
List Of Titles
