Please use this identifier to cite or link to this item: http://hdl.handle.net/1959.13/41765
- Title
- Dynamic analysis of non-steady flow in granular dense phase pneumatic conveying
- Author/Creator
-
Tan, Shengming
- Institution
- University of Newcastle. Faculty of Engineering and Built Environment, School of Engineering
- Description
- Research Doctorate - Doctor of Philosophy (PhD)
- Description
- Slug flow dense phase pneumatic conveying can be a most reliable, efficient method for handling a remarkably wide range of dry bulk solids. Models for pressure drop over slugs in the low-velocity slug-flow pneumatic conveying by many researchers only took the force balance into account with the pressure drop. However, the nature of the slug flow pneumatic conveying is discontinuous and seldom becomes steady during the conveying period which requires further investigation. The fundamental understanding to gas/slug interaction in this thesis is that, by being a dynamic system, the faster a slug moves at a speed, the larger the space is left behind the slug. The gas feeding into the conveying system has to fill the increased space first then permeates through the slug and provides a push force on the slug. With gas permeation rate defined by the permeability factor, the derivative of the upstream pressure based on the air mass conservation law has been developed. For a given conveying system, the pressure in the pneumatic conveying system can be solved for steady conditions or numerically simulated for unsteady conditions. Parametric analysis have been conducted for pressure drop factors and found that slug velocity is the major reason causing the pressure fluctuation in the pneumatic conveying system. To verify the pressure drop model, this model has been applied to single slug cases and compared with experimental results for five different bulk materials, showing good results. Three distinct zones, i.e. Fixed Bed Zone, Initial Slug Zone and Reliable Slug Zone, have been found to exist in the relationship between slip velocity and pressure gradient. Lastly this model has also been applied to a multiple slug system under uniform conditions. In all, the fundamental gas pressure/pressure drop model developed in this thesis approaches slug flow conveying from a different viewpoint from the traditional momentum and material stress models developed by previous researchers, and provides a way of assessing the non-steady flow behaviour in granular dense phase pneumatic conveying. This model not only attains a better understanding of slug flow behaviour but also increases the accuracy of predicting the parameters.
- Relation
- University of Newcastle Research Higher Degree Thesis
- Date
- 2009
- Keyword(s)
-
pneumatic conveying;
slug flow;
granular material;
dense phase;
non-steady flow
- Resource Type
- thesis
- Rights
- Copyright 2009 Shengming Tan
- Identifier
- http://hdl.handle.net/1959.13/41765
- Language
- eng
- Full Text
-
-
103 Visitors
167 Hits
29 Downloads
