Please use this identifier to cite or link to this item: http://hdl.handle.net/1959.13/27313
- Title
- The use of doubly fed reluctance machines for large pumps and wind turbines
- Author/Creator
-
Jovanovic, Milutin G.;
Betz, Robert E.;
Yu, Jian
- Description
- Brushless doubly fed induction machines (BDFIMs) have been extensively researched over because of the possibility of using a partially rated inverter in many applications with limited speed variations. However, the special cage rotor construction and substantial rotor losses is one of the key deficiencies of these machines. A similar and extremely interesting machine, the brushless doubly fed reluctance machine (BDFRM), has been largely ignored in comparison. This was mainly due to the fact that reluctance rotor designs were not capable of generating saliency ratios large enough to make the BDFRM competitive with other machines. However, developments in reluctance rotors, spurred on by research into synchronous reluctance machines, have resulted in high-saliency-ratio cageless rotors that are economical to build. This, together with the promise of higher efficiency and simpler control compared to the BDFIM, means that further investigation of the BDFRM is warranted. This paper presents a comparative theoretical analysis and aspects of practical implementation of the important control strategies and associated machine performance/inverter size tradeoffs for the BDFRM in the light of its most likely applications-large-pump-type adjustable-speed drives and variable-speed constant-frequency wind power generation systems.
- Relation
- IEEE Transactions on Industry Applications Vol. 38, Issue 6, p. 1508-1516
- Publisher Link
- http://dx.doi.org/10.1109/TIA.2002.804749
- Date
- 2002
- Publisher
- Institute of Electrical and Electronics Engineers (IEEE)
- Keyword(s)
-
brushless machines;
machine control;
pumps;
reluctance generators;
reluctance motor drives;
rotors;
variable speed drives;
wind turbines
- Resource Type
- journal article
- Rights
- Copyright © 2002 IEEE. Reprinted from IEEE Transactions on Industry Applications, 38, 6, 1508-1515. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Newcastle's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.
- Identifier
- http://hdl.handle.net/1959.13/27313
- Identifier
- ISSN:0093-9994
- Reviewed
- Full Text
-
-
48 Visitors
58 Hits
7 Downloads
