Please use this identifier to cite or link to this item: http://hdl.handle.net/1959.13/933927

OpenURL Link
Title
Experimental determination of cutting and deformation energy factors for wear prediction of pneumatic conveying pipeline
Author/Creator
Pang, Kim;  Cenna, Ahmed;  Tan, Shengming;  Jones, Mark
Institution
The University of Newcastle. Faculty of Engineering & Built Environment, School of Engineering
Description
Pneumatic conveying has become a well established method of transporting materials in the resource and process industries. Erosion is a phenomenon that occurs in pneumatic conveying pipeline due to the inherent nature of conveying process. In pneumatic conveying, particulate material is transported by the motive of compressed gas with velocities usually less than 60 m/s. In the present investigation, erosion tests were performed in order to study the wear behaviour and determine specific energy factors of pipeline material for the predictive models of wear in dense phase mode of pneumatic conveying pipeline. These tests were performed on mild steel and aluminum surface with alumina and Ilmenite particles. Double disc method was used to measure the particle impact velocities with different powder mass flow rates at different compressed air pressures for erosion tests. Erosion rate and erosion behaviour were studied under the influence of solid particle erosion at dense phase conveying condition. Deformation and cutting energy factors were then determined for predicting wear based on the material removal mechanisms. These factors will then be incorporated in a generic software algorithm to predict the service life of pneumatic conveying pipeline.
Relation
4th World Congress on Engineering Asset Management (WCEAM 2009). Engineering Asset Management: Proceedings of the 4th World Congess on Engineering Asset Management (Athens, Greece 28-30 September, 2009) p. 877-885
Publisher Link
http://dx.doi.org/10.1007/978-0-85729-320-6_99
Date
2010
Publisher
Springer-Verlag
Keyword(s)
pneumatic conveying;  erosion;  pipelines
Resource Type
conference paper
Identifier
http://hdl.handle.net/1959.13/933927
Identifier
ISBN:9781849960021
Reviewed
Reviewed
6 Visitors 11 Hits 0 Downloads
Save/E-mail Citation
Citation Format
E-mail Address
Subject
"Experimental determination of cutting and deformation energy factors for wear prediction of pneumatic conveying pipeline"
 
OR